On This page you can download digital tutors Methodically Designing a Spur Gear in SolidWorks, (Video tutorial) with High Speed & Direct link.
In this series of SolidWorks tutorial videos we want to work on the calculation and 3D modeling methods of a gear used with a windmill water pump motor. We begin our modeling tutorial with a brief description of the gear pair spike on a retaining base, and explain how the two gears are connected.
Once we have figured out how to calculate the speed of the gears on an Excel spreadsheet file, then we will enter these values and information into a sketch design and use them with SolidWorks features and capabilities. We also use some of SolidWorks automatic design features to speed up our design process (SolidWorks) by entering global equations and variables and some Smart Dimensions rather than designing multiple Gear and complex system, done in minutes.
Finally, we assemble both the gear and the gears of the windmill engine together by a mounting stand. And then we’ll talk about the potential for modifications that can optimize our design. At the end of this SolidWorks tutorial video, you will not only gain a good understanding of appreciations and how gear pairs work, but you can use the knowledge you have learned from all the models you have.
Throughout these lessons, we will cover the calculations and methods of modeling a pair of spur gears that is used in a windmill water pump engine. Software required: SolidWorks 2012 and higher.
- Duration: 2:30
- Project Files: included
- Instant download high speed : Yes